Rough Top Conveyor Belts

Rough Top Conveyor belting solutions offered comprise two as well as three ply construction choices that also feature cut edges as well as carcass of NN/EP fabric which comes with surface texture that aids in resisting the tendency for material to roll back down the conveyor while at transportation stage. With the top covers made using wear-resistant rubber featuring non-slip surface, these also help in providing -

• Cushioning effect

• Mollifying as well as absorbing vibrations and impact received on transported materials

• Simultaneously also aiding in prevention of slipping

Applications:

Some of the standard applications where these Rough top conveyor belt solutions find usage include:

• For transportation of light weight goods

• For transportation of products like sacks, boxes and parcels

• For transportation on inclined surface at maximum angle of 35 degrees

• Typical application include for belt flight loaders, lorry loaders and others

• For transporting light goods having movement in either inclined or horizontal

• Suitable for transportation of fragile/deformed materials as well as pack goods like papers, bags, glass, boxes as well as cartons to of 35 degrees maximum

Carcass Construction

All constructions have EP (polyester/nylon) fabric plies that  provide low elongation, high tensile strength and are impervious to moisture. Other belt types for special applications  available on request

Availability   

Standard widths range from 400mm up to 2000mm. RA (high  abrasion resistant), LO and DO (oil resistant) cover grades.

To provide optimum carcass protection, Long Li RA covers are fitted as standard because of its excellent resistance to cuting combined with outstanding resistance to abrasion. Long Li RA significantly exceeds the requirements for the DIN Y  abrasion resistant standard. Profile belting is also available to order in ROM and ROS (oil resistant) cover grades. All Longli cover qualities are antistatic according to EN ISO 284 and are extensively ozone tested in compliance with EN ISO 1431 ozone resistance (50 pphm, strain 20%, 96 hours no cracking) and resistant to the damaging effects of ultraviolet in order to avoid premature failure due to  cracking of the belt surface. All Longlicover qualities perform well beyond the minimum requirements of the international standards and comply to REACH regulation.